 |
|||||||||||||||||||||||||||
|
 |
|
|||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
|
Specials These are usually trade-ins, like new surplus medical equipment or deals we just could not pass up. So now we are offering the savings directly to our customers. Get them soon before they are gone. Please call for availability and details.
|
|
|||||||||||||||||||||||||
MoboLazer ML10-300 This was a MoboLazer ML10-250 but we removed the 250mW argon laser and replaced it with a 300mW 532nm green YAG. Best of all we retrofitted the last stack with a set of Cambridge 6800HP 30K PPS scanners in one of our custom designed mounts and paired it with Full-Auto. Now you have the advantage of not only beams but text, liquid sky effects, and the ability to design and create your own animations and logos in a matter of minutes instead of hours. You can also still use most of the beam stacks on the rail at the same time you are using the scan head. All modifications have been carefully mounted in an extruded aluminum enclosure which now takes the place of the original laser. An ILDA compatible DB25 input connector has been added to the rear of the system. This unit comes complete with
The projector is in very good condition and shows only minor signs of use. All optics have been professionally cleaned and the factory dichros have been removed and replaced with beam splitters. The projector is completely sealed and the laser light only escapes where it has been originally designed to by the factory. Please call for pricing and details. |
|
||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
 |
 |
 |
|||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
